New Blue Ocean Market Comes To Service Robots

2020-04-13

Since the eruption of 2019-nCoV, the robot has performed well in the medical industry, distribution, routing inspection, etc. And the advantages are obvious: the absence of fatigue, maximum precision, and speed, optimum ergonomics. Disinfection stimulated the great development of the market of disinfection robots unconsciously as an important part of epidemic prevention. The growing demand for disinfection robot superposing great expand in new infrastructure, service robots are coming to the new blue ocean  market.

Servo unit is one of the essential components of a service robot, mainly comprising a shell, electric control panel board, motor, position detection element, and geared motor.

Servo reducer has a high rate and high power density. All modules of gear in transmission form range from 0.15mm to 0.5mm, belonging to small-module gear. Parallel shaft gear is the transmission form that is most normal and most widely used, often being used in a traditional steering engine of aircraft model. Compared with another field, applying on the field of the robot has a high requirement for the life of reducer, and it’s more sensitive to noise. For the limitation of tooth width, using helical gear is useless to the improvement in noise. Optimizing the parameter of gear, increasing clutch structure in reducer, the gear can be saved when the reducer is attacked. Planetary gear can achieve small space and high transmission ratio, while servo unit is required to have low return difference, planetary is hard to assemble because it needs to be engaged with the sun gear and the internal gear.

       

ZHAOWEI helps intelligent robots to achieve intelligence

ZHAOWEI range of gear motor combines planetary gear set with DC motor, brushed motor,dc brushless motor, and stepper motor products. Torque ratings to 2000 cNm are available in our growing range of gear ratios which enables to meet the requirements of each customers application.  

Improving the technology of Abrasion-proof material,processing optimization, lubrication and assembly,ZHAOWEI develops series driver geared motor having efficiency that is suitable for the robot, lightweight and low maintenance charges. Strictly required in structure and space design, improving the stability of gearboxes, ZHAOWEI cut the total cost for reducers. Characterized by strong torque, small vibration, stability, strong loading capacity and small volume,reducer made by ZHAOWEI meet transmission requirements of six degrees of freedom robots, improving performances of perception, identifying,structure,transmission,controlling and interacting for the intelligent robot.

 

Machining Center

ZHAOWEI Mold manufacturing center has many machining equipments, such as AGIE wire cutting machine, AGIE EDM, Sodick wire cutting machine, MAKINO,FANUC,RODERS, HAMAI hobbing machine, WAHLI, to improve machining accuracy.

Dynamic Simulation And Finite Element Analysis

In the gear and gearbox design phase, kinematics simulation is used to verify the stability and local interference of the gear pair motion.

Quality Control

ZHAOWEI has Germany ZEISS 3D Measuring Instruments, Germany Werth testers, Japan OSAKS Seimitsu CLP-35 and OSAKS Gear testers, OGP plane testers, Switzerland METTLER TOLEDO Thermo Gravimetric Analyzers and other testers, which greatly improves quality of products.

 

Gear Testing Center

OSAKA SEIMITSU CLP-35S gear test center, mainly tests spur gears, helical gears, worm gear and internal gear tooth profile error (adjacent, single, cumulative) and radial runout, then generate test reports.

DIATEST DIA-COME imported abroad can quickly switch between the internal and external gear inner diameter and outer diameter measurement form, measured by adjusting the test force.


Intelligent motion control

Miniature and low-cost are key topics of every modern technological revolution, and drive system for sweeping robot is no exception. ZHAOWEI drive module for sweeping robot using stable and reliable frequency changer, motor, and gearbox product combined with coupling, having a compact and modularized design. Characterized by strong torque, low vibration, great impact resistance, big loading capacity and small volume, product of ZHAOWEI can meet transmission requirement of six degrees of freedom robots.


Introducing EMC laboratory

With the increasing complexity of the electromagnetic environment in our living space and the widespread application of electronic technology in various industries, the problems of EMC in electronic drives will become increasingly prominent, so the corresponding testing methods must be improved. ZHAOWEI introduces the EMC laboratory in the early stage of construction, so that the produced electronic drive equipment or systems can meet the operating requirements in its electromagnetic environment and does not produce unbearable electromagnetic interference to any equipment in the environment.




Media Contact
Company Name: Shenzhen Zhaowei Machinery & Electronics Co. Ltd.
Contact Person: Media Relations
Email: sales@zwgearbox.com

City: Shenzhen
Country: China
Website: www.zwgearbox.com

Penafian: Artikel ini diterbitkan semula dari media lain. Tujuan mencetak semula adalah untuk menyampaikan lebih banyak maklumat. Ini tidak bermakna laman web ini bersetuju dengan pandangannya dan bertanggungjawab ke atas keasliannya, dan tidak menanggung tanggungjawab undang-undang. Semua sumber di laman web ini dikumpulkan di Internet. Tujuan perkongsian adalah untuk pembelajaran dan rujukan sahaja. Sekiranya terdapat pelanggaran hak cipta atau harta intelek, sila tinggalkan mesej.

©hak cipta2009-2020 Forum Teknologi Malaysia Timur